< Gray trough-type I-shaped bridge b_?__r__ br /> : b :
< Gray trough-type I-shaped bridge b_?__r__ br />
< Gray trough type I-shaped bridge b_?__r__ br />
< Btrough type b_?__r__ br />
< Btrough type b_ ?__r__ br />
< I-shaped fiberglass cable tray b_?__r__ br />
< FRP busbar b_?__r__ br />
< Bridge cover b_?__r__ br />
: b : italic_b highway, railway
Kaiti_b Installation:
Kaiti_b Before installing the cable tube box, set the bracket on the bridge. The size of the bracket depends on the specifications of the cable tube box selected. But the distance should not be larger than that, usually made of angle steel.
Kaiti_b Place the cable conduit box on the bracket. After the position is determined, use an electric drill to drill through the cable conduit box and the support frame at the position of the support frame, and then tighten it with bolts. Drill two holes on the support frame, and use two sets of bolts.
Kaiti_b Socket-type joints and seam covers should be used at the joints of cable tube boxes to connect the two sections of cable tube boxes into a whole.
Kaiti_b The connection between the cable tube box and the roadbed cable can be made of concrete pipe or steel pipe.
Italics_b Use fiberglass cable pipe box elbows to connect to pipe boxes at road corners.
Kaiti_b The box cover and box body are fixed with plastic bolts and stainless steel bolts.
: b :
KaiTi_bCompany address: Xinxing Industrial Concentration Zone, Yangzhong City Development Zone
KaiTi_bContact person: Yang Keming
KaiTi _bMobile phone:
Kaitai_b
Kaitai_bCompany phone number:
Kaitai_bCompany fax: